Guidelines for printing both sides of paper
Note the following guidelines:
●
Do not print on both sides of labels, transparencies, envelopes,
vellum, or paper heavier than 28 lb (105 g/m
2
). Paper jamming
might occur with these types of media, and damage to the printer
might occur with labels.
●
You might need to configure the printer driver to recognize the
duplexer. (See the printer driver online help for details.)
●
To print on both sides of paper, make the selection from the
software or printer driver. (See the printer driver online help.)
●
If you do not use the printer driver that came with the printer, you
might need to change the Duplex setting from the Paper Handling
Menu in the printer control panel to
DUPLEX=ON
. Also in the Paper
Handling Menu, set Binding to long edge or short edge. (For more
information, see “Layout options for printing both sides of paper”
on page 52.)
●
Close the rear output bin to use the duplexer (see “Selecting the
output bin” on page 44). Opening the rear output bin disables the
duplexer.
EN
Printing both sides of paper (optional duplexer) 51